Router |
The RouterToolProcessData type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | ActualGripperForcePickAndPlace | Max gripper force applied to PCB. (N)(Optional only-Applicable for gripper hardware equipment type) |
| ActualIncomingPressure | Incoming Air Pressure Level |
| ActualMachinePower | Electric Power consumption of Machine |
| ActualVacuumLevel | Vacuum or Negative Pressure Level |
| AxisDetails | List of Axis for Router |
| FeedRate_SetPoint | Machine set point - feed rate routing program (in mm/s) |
| MaxSpindleRpm | Max Speed at which the Spindle operates - RPM (Revolutions per minute) |
| MinSpindleRpm | Min Speed at which the Spindle operates - RPM (Revolutions per minute) |
| NumberOfBoardsRouted | Panel count for batch/period routed |
| SpindleSpeed_SetPoint | Machine set point – Spindle Speed (in mm/s) |
| ToolBitChangeDistanceAlarmSet | Alarm set to optimal distance for bit change |
| ToolBitDistanceRouted | Distance of ALL tabs cut since last Bit Change |
| ToolBitEndTime | Last Tool bit stop used time |
| ToolBitStartTime | Tool bit start used time |
| ToolDataVersion | Tool Data -Version |
| ToolDiameter_SetPoint | Machine set point Value- tool bit diameter (in mm) |
| VacuumDistanceRouted | Distance of ALL tabs cut since last bag/filter change in (in Meter). |
| VacuumFilterChangeDistanceAlarmSet | Alarm set to optimal distance for filter change in (Meter). |
See Also