Zone |
The ZoneData type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Bath_Temp | Temperature of the solder bath in Celsius |
| Bath_Wave_Enabled | Solder Wave Height correction enabled for the selective soldering system "True" or "False" |
| Bath_Wave_Hgt | The value the wave height was corrected by in mm (millimetres) |
| Bot_Preheater_Power | The power setting for the bottom side preheater as a percentage (0-100%) |
| Bot_Preheater_Soak | The power setting for the bottom side preheater during the soak phase as a percentage (0-100%) |
| Bot_Preheater_Temp | The maximum temperature of the item during the preheating cycle in Celsius |
| Bot_Preheater_Time | The total time for the prehearting phase within this zone |
| Bottle1_Pressure | Pressure of the Nitrogen for flux applicator 1 in kPa (kilopascal) |
| Bottle2_Pressure | Pressure of the Nitrogen for flux applicator 2 in kPa (kilopascal) |
| Fid_XCorrection | The X-axis fiducial correction value in mm (millimetres) |
| Fid_YCorrection | The Y-axis fiducial correction value in mm (millimetres) |
| Flux_Volume | The total volume of flux applied to the item in mg (milligrams) |
| ProcessTime | The time the item was within this zone of the Selective Soldering System |
| Solder_Quantity_Used | The quantity of solder consumed by the soldering process in grams |
| StageSequence | The identity of the zone for this set of process data. Corresponds to the StageSequence number of the related Stage |
| Top_Preheater_Power | The power setting for the top side preheater during the heating phase as a percentage (0-100%) |
| Top_Preheater_Soak | The power setting for the top side preheater during the soak phase as a percentage (0-100%) |
| Top_Preheater_Temp | The maximum temperature of the item during the preheating cycle in Celsius |
| Top_Preheater_Time | The total time for the prehearting phase within this zone |
See Also